Categories: Blog

Gigahertz-Optik’s PLL-1701 High-Speed Transimpedance log/lin Amplifier Offers Internal Integrating Sphere — LED professional


The PLL-1701 offers nine linear amplifier stages each with an identical rise time of 16µs. The maximum input current is 1mA and output signals can be up to +/- 5V. Additionally, the PLL-1701 offers a single-range logarithmic amplifier which can be used for applications with very fast dynamic fluctuations such as fast positioning tasks or pulsed light sources with very wide dynamic ranges.

The voltage output of the Analogue/Analogue mode (AA) is suitable for use with oscilloscopes and other data acquisition systems (e.g. datalogger). The PLL-1701 also offers an Analogue to Digital Conversion mode (ADC) in which the input current signals are digitized by the internal processor and output via RS422 and USB 2.0 interfaces. Data analysis is done with either the included application software or the available Software Development Kit (SDK).

Evaluation routines for light flicker assessments (including PstLM, SVM, flicker frequency, flicker index) are already implemented in the software and also in the SDK and can thus be used directly. Therefore, the PLL-1701 complies with international standards for temporal light modulation (TLM) applications including the EU Ecodesign Directive, CIE TN006:2016, and NEMA 77-2017.

Furthermore, the PLL-1701 has an internal integrating sphere with an extended range InGaAs photodiode. FC-terminated fibers can be directly connected allowing their power (A/W/nm) to be measured in the spectral range from 400-1550nm. The InGaAs photodiode signal is also output in both AA and ADC modes.

Additional information can be found at https://www.gigahertz-optik.de/en-us/product/PLL-1701

About Gigahertz-Optik GmbH:

Gigahertz-Optik GmbH was founded in 1986 as an independent company by Dipl.-Ing. (FH) Anton Gugg-Helminger and Wolfgang Dähn. The continuous development of our product range has resulted in a comprehensive selection of light measurement devices, finely tuned accessory products, and services.  With its US subsidiary, Gigahertz-Optik Inc., Gigahertz-Optik GmbH is a global manufacturer of metrological solutions for optical radiation.devices, finely tuned complementary products, and services.  With its US subsidiary, Gigahertz-Optik Inc., Gigahertz-Optik GmbH is a global manufacturer of metrological solutions for optical radiation. – https://www.gigahertz-optik.de



Source link

admin

Share
Published by
admin

Recent Posts

High TLCI Illumination for Accurate Color in Telework & Indoor Video Recording — LED professional

Over the past 50 years, Nichia has demonstrated its commitment to improving the overall performance…

3 years ago

Blueglass to Aquire US Laser Diode Facility — LED professional

To fund the acquisition and ongoing operation of the production facility, BluGlass has secured A$3.4…

3 years ago

High-performance for wavelengths in infrared

New CAS 140D IR spectroradiometer with improved optical and electronic components offer the user higher…

3 years ago

Seoul Semiconductor Relocates Headquarters of Automobile Division to Germany — LED professional

SSC boasts world's only LED and LD technology for vehicles using all wavelengths of light…

3 years ago

Panel technology: HELLA develops new design concepts for the vehicle front end

  ​E-cars do not have a classic radiator grille, so the front of the vehicle…

3 years ago

Data Reporting, Diagnostics, Sensors and NLCs Added to ANSI C137.4-2021 Standard for Digital Lighting Control — LED professional

“We welcome the further alignment of ANSI C137.4-2021 and D4i, which is expected to lead…

3 years ago