Everlight’s ADB matrix intelligent LED headlamp can automatically turn off the light source in the region to avoid interference from high beam when the CCD sensor detects an oncoming vehicle. 24 LEDs of the EVL-EL ALFS 1×1 (EU) series (size: 2.0×1.6 mm) were used, where 245 lm can be provided for single LED at the operating current of 700 mA. Due to a combination of smart control, fisheye lens, control module, guide prism in special arrangement and CCD, the headlamp can be more accurate on identification and lighting. The products comply with ECE R112 class B Driving Beam and were jointly designed and developed with all OEMs involved.
The new Mini Rear Lamp was manufactured with fine pitch display components from Everlight that meet 27.63 Pixels Per Inch. It implements an Adaptive Rear Lamp System and flexibly adjusts the displayed figures and texts to provide a clearer quality of image and to conform to all requirements of a rear lamp. The Smart Multi Array Rear Lamp uses Everlight’s Smart Multi Series (3.5×3.5×0.8 mm) and a built-in drive and control ICs to achieve the information delivery and a diversified figure display in a most convenient way. The technology can be used to design rear lamps, brake lamps and turning lamps. The new Mini Rear Lamp provides a priority solution for rear lamps due to the visual effect combined with and performance quality.
In terms of infrared products, Everlight demonstrate many transmitting/receiving components (IR, PD/PT) in different sizes, radiant intensities and viewing angles, widely applied for e-books, smart boards, oximeters and household vacuum cleaners. Suitable for oximeters for instance, the IRRG25-16C is an SMD transmitting component with three-color wavelengths: red (660 nm), green (525 nm) and infrared (940 nm).
With the optical spectrum from different wavelengths reflected by a flat lens on top, the blood oxygen saturation can be further tested together with Everlight’s PD51-40 series (dimensions: 5.1×4.0x0.85 mm), to provide a most accurate diagnosis of the heartbeat. Together, IRRG25-16C and PD51-40 series can retrieve the heartbeat rate in a most convenient way in wearable applications such as sports watches. Optocouplers, another key product segment, will be demonstrated at Electronica 2018 as well, including Standard Coupler, High Speed Coupler, Photo Triac and Solid State Relay (SSR) series to match different package sizes to meet all possible applications, including power meters, communication equipment, UPS and industrial control.
Everlight Electronics Co., Ltd. was founded in 1983 in Taipei, Taiwan. Led by Chairman Robert Yeh. Everlight has over 35 years of R&D experience for reliable capability. With global operations for customer service and an excellent brand reputation, Everlight has been ranked in the top four LED manufacturers in this competitive LED market. Our products are manufactured in-house to guarantee maximum quality and service. Everlight provides the most diversified product portfolio consisting of Low Power LEDs to Ultra High Power LEDs, Through-hole LEDs to SMD LEDs, LED Lighting Modules, Digital Displays, Optocouplers and Infrared Emitters and Sensors, and many other LEDs for the Lighting, TFT, Automotive, Signage, and Consumer markets.
Today, Everlight is a global company with over 6,400 employees based throughout China, Hong Kong, Japan, Korea, Singapore, Malaysia, India, Germany and U.S.A. Please visit us at www.everlight.com
Over the past 50 years, Nichia has demonstrated its commitment to improving the overall performance…
To fund the acquisition and ongoing operation of the production facility, BluGlass has secured A$3.4…
New CAS 140D IR spectroradiometer with improved optical and electronic components offer the user higher…
SSC boasts world's only LED and LD technology for vehicles using all wavelengths of light…
E-cars do not have a classic radiator grille, so the front of the vehicle…
“We welcome the further alignment of ANSI C137.4-2021 and D4i, which is expected to lead…