EP30LTE-2 is a highly dimensionally stable epoxy system with low linear and volumetric shrinkage upon curing. The compressive strength of the cured material is 24,000-26,000 psi and its CTE is very low at 10-13 x 10-6/in/in/°C. It is a reliable electrical insulator featuring volume resistivity of more than 1015 ohm-cm. EP30LTE-2 meets NASA low outgassing specifications and features a combination of physical properties making it ideal for applications in aerospace, optical, electronic and specialty OEM industries where these requirements are critical.
EP30LTE-2 is a two part epoxy which obtains optimal properties when cured overnight at room temperature followed by a heat cure for 2-4 hours at 150-200°F. This system offers moderate flow characteristics with a mixed viscosity ranging from 70,000 to 100,000 cps. In addition to standard packaging units of ½ pint, pint, quart, gallon and 5 gallon kits, the epoxy is available in premixed and frozen syringes.
For additional information, please visit https://www.masterbond.com/tds/ep30lte-2 or contact Master Bond at technical@masterbond.com
Master Bond formulates adhesive, sealant, and coating solutions for LED lamp and luminaire assembly applications. Our epoxies, silicones, UV and LED curing compounds offer a combination of properties to meet stringent testing requirements for reliable long term performance. Select systems absorb stress, resist solvents and fuels, and offer thermal conductivity, a low refractive index, low ionic content and high thermal stability. Master Bond provides unmatched technical expertise and customer support. – www.masterbond.com
Over the past 50 years, Nichia has demonstrated its commitment to improving the overall performance…
To fund the acquisition and ongoing operation of the production facility, BluGlass has secured A$3.4…
New CAS 140D IR spectroradiometer with improved optical and electronic components offer the user higher…
SSC boasts world's only LED and LD technology for vehicles using all wavelengths of light…
E-cars do not have a classic radiator grille, so the front of the vehicle…
“We welcome the further alignment of ANSI C137.4-2021 and D4i, which is expected to lead…